How And when to FIX ROKU when it Continues to keep FREEZING IN Seconds [2022]


Roku is a very appealing option for a variety of reasons. It may be the straightforward user interface, the powerful streaming features, or the brand-new Find my Remote function.

The extensive and varied channel lineup is what first drew my attention to the service. Because of this, I’ve been able to accumulate quite a few of their gadgets over the years to use for my live sessions.

But please don’t get the wrong idea, they are not without flaws. Since I use a Roku personally, I can state without a doubt that screen freezing is the feature that irritates me the most.

I searched the internet for a solution to the situation by going online and looking at the Roku help website and user forums.

I discovered that the Roku TV often freezes, most likely as a result of the device being overheated or having out-of-date software.

You should conduct a short power cycle on your Roku and upgrade it to the current version if it continues freezing up on you. If the problem lies with a specific channel, you should delete it and then add it again. If the issue continues to occur, you might try doing a factory reset.

Examine the Fundamentals


When trying to troubleshoot an issue, you should always make sure that the fundamental aspects are covered. Problems have been reported with HDMI, the internet, updates, and interference.

Make sure the HDMI connection is secure.

It’s possible for your Roku to take on a new character if you have a defective HDMI cable or an unstable connection. It might be a problem with freezing, it could be an issue with the AV sync, or it could even be a power outage (which is easier to find out).

If you are using an exterior Roku device that is linked to a smart TV, such as the smart TVs manufactured by Samsung, the Roku won’t show up if the HDMI cables are unstable.

Check that the cables are attached in the correct manner.

Remember to always utilize HDMI cables that support the HDCP 2.2 connection whenever possible. HDCP stands for “high-bandwidth digital content protection,” and it is a licensing protocol that is essential for streaming material on many platforms, such as Netflix and Amazon Prime Video.

It is possible that you need to choose a suitable cable in order to use your device, however, this will depend on the model that you have. A cable that is compatible with HDMI 2.0 could be necessary for a device that can display 4K content.

Make ensure that you are fully connected to the internet.

An unreliable internet connection may result in a variety of issues, one of which is a screen that becomes unresponsive. Certain TCL Roku TV models have historically suffered from WiFi connectivity troubles as well.

Verify that you are connected to a reliable network by running a speed test on your mobile device or desktop computer to determine the download and upload rates.

If the speeds are inconsistent, you may want to attempt resetting the link by rebooting the modem or the router. Just pull the plug on the router and modem, wait a few seconds, and then plug it back in.

After then, check the speed of the gadget, and then reconnect it. If the issue persists, you might attempt to change the connection to one that has higher bandwidth. Streaming Stick and Ultra Series Roku players are examples of Roku devices that allow dual-band connectivity.

There are several restrictions placed on a typical 2.4 GHz spectrum. It is unable to sustain huge traffic, and when there is considerable traffic, the latency also increases. This may result in the device experiencing difficulties with buffering as well as freezing.

A band that is wider than 5 GHz does not have these constraints. It is able to sustain more traffic without exceeding the latency threshold. If you want to prevent any more problems with your network, you could try switching your Roku’s connection to the 5GHz frequency.

Perform a Search for Updates.

Any digital device may become susceptible to a wide variety of glitches and problems if it is operating with an outmoded version of the firmware.

In point of fact, it is one of the primary reasons why the user interface of the Roku continues to become slower and slower.

Always make sure that you are using the most recent version of Roku software.


Please follow these instructions to update your Roku.

1. From the Home screen, select the Settings icon to launch it.

2. Open Systems.

3. To manually check for available updates, choose System Update and then click the Check Now button.

After the software updates have been installed, you will need to restart the device.

Make sure there aren’t any interferences.

Another problem with Roku that is not immediately obvious but might have serious consequences is its sensitivity to meddling. An example that is well known is a problem with interference that was produced by a gadget called Nintendo Switch.

When you are playing a specific game on the Switch, you will run into an issue. The wireless transfer that was taking place between the Switch and the network seemed to render a Roku that was put close inactive.

Simply turning WiFi off on the switch will solve the problem in a flash. In the same vein, take precautions to ensure that there have been no wireless devices in the immediate vicinity of the Roku. Moving the Roku device could possibly be of assistance.


Turn the Roku’s power off and then back on.


You should do a power cycle on the device if you find that the Home screen has been unresponsive to your instructions and has become frozen.

To perform a power cycle on a piece of electronic equipment, you must disconnect it and then reconnect it after a brief period of time. This will cause all of the temporal inconsistencies that were previously present in the gadget to vanish while simultaneously causing the device to become cooler.


You also have the option, on the Roku to manually restart the device by following these instructions.

1. Under the tab labeled Settings, click and then enter the System menu.

2. Select the option to Restart the System.

3. After that, hit the Restart button.

In order to restart your Roku TV, go to the Settings menu, then choose System, then Power, and finally select System Restart.

It’s possible that previous Roku devices (from the first and second generations) don’t have this option.

Verify, and if necessary, revert any changes.

It has been noted that making modifications to your Roku—especially on the older models—will result in frozen displays and interfaces that flicker.

As a troubleshooting step, you should make an attempt to undo any recent modifications that you have made on Roku. After you have undone the adjustments, restart the device for the best possible results.

It is well knowledge that screensavers and backdrop changes result in an error. Be careful to revert them to their original settings as soon as possible.

The following is a list of further alterations that should be noted.

Adjusting Roku’s Refresh Rate Settings to Adapt Automatically

If you are having any problems with the display, you need to make sure that this setting is switched off. Many people believe that it is the primary cause of problems.

This option will, as its name indicates, automatically modify the frame rate of your device to match the requirements of the material that you are playing on it.

To deactivate the auto-adjust settings for the refresh rate on your Roku, follow these specific instructions.

1. From the main menu, choose the Settings tab. Click the System button.

2. Select Advanced System Settings from the drop-down menu.

3. Navigate to the Advanced Display Setting menu and deactivate the option to automatically modify the display’s refresh rate.

You could try restarting your device and checking for any problems.

Bandwidth Saver should be turned OFF.

The bandwidth saving setting is another option that, if enabled, might result in problems with the internet and a frozen screen.

If the remote has not been used for more than four hours, the device will go to sleep as a result of this setting. It is possible that the user interface will not be as snappy as it was previously when you wake the device from its sleep state.

To deactivate the Bandwidth Saver feature, go here.

1. Select the Network option from the Settings menu.

2. Disable the Bandwidth Saver by clicking on it and selecting that option.

Try restarting the device and seeing if the problem persists after that.

Concerns Regarding the Roku Remote


It’s possible that the issue is not with the Roku device itself but rather with the connection between the Roku and the Remote.

This problem may have been caused by a dead battery or by interference in the transmission.

Check to verify that the remote’s battery is charged and that there are no obstructions in the line of sight between the Roku and the TV (need not worry about this in the case of RF-enabled remotes).

The following are some additional considerations to make about remotes:

Disconnect and then reconnect the Remote.

In the event that the connection seems to be broken, you may try resetting it by unpairing and then repairing the remote with the Roku device.

In order to disconnect and then reconnect the Roku control,

1. Ensure that the Roku is turned off and that the electrodes for the remote are removed.

2. Power on the Roku and insert charges into the remote control before turning it on.

3. To connect the remote, locate the button that is located next to the battery compartment and press and hold it until the LED begins to blink.

4. To pair the remote, you will need to follow the on-screen instructions.

Take Off Any Earphones or Headphones That Are Attached to the Remote

If you have an earphone or headphone attached to the headphone port on the Remote, there is a possibility that the Shield TV will not function properly.

Take off the headphones or earphones, and then restart the remote by taking the batteries out of it.

Roku customers often complain about their remotes making a beeping sound, which is another concern.

Roku issues with applications and channels

Problems with freezing may not always be the consequence of a broken Roku; rather, it’s also possible that the problem is caused by a flawed application.

There have been reports of problems with a number of applications, including Netflix and Sling TV, which may cause the whole stream to become jerky and frozen.

There is no way to prevent the problem once it has already shown itself; even though it will, in all likelihood, be rectified in the future through an update. TCL Roku TVs have also been experiencing problems with their channel selections.

You have the option to log out of the channel and then log back in, however, this may not be as efficient as deleting the app entirely.

Please follow these instructions to uninstall the application.

1. From the Home screen, browse to the incorrect channel and place the cursor over it.

2. To access the settings menu, use the * button located on the remote control.

3. At the very bottom of the list, choose the Remove channel option.

4. Confirm the deletion of the channel by clicking the Remove button.

Once restarting the device, you will be able to reinstall the channel by searching for it in the app store after you have completed the restart.

If you discovered the problem after the channel in question was installed, you will need to ensure that the most recent application you installed is deleted.

Performing a factory reset on the Roku

The last trick and tip in my bag is to restore the Roku to its original settings from the manufacturer. This will erase any faults and issues that were previously present in the device, as well as empty the cache.

To reset your Roku, follow these instructions in order.

1. Under the tab labeled Settings, click and then enter the System menu.

2. Navigate to Advanced System Settings, then choose Factory Reset from the drop-down menu.

3. On the screen, enter the unique code that is provided and then click the OK button.

4. Stay patient and wait for the procedure to be finished. Reinstall Roku and check for any remaining issues after doing so.

You may reboot the device if the screen becomes unresponsive and there is nothing you can do to modify it by pressing a certain sequence of buttons on the Roku remote.

To do a gentle reboot of the device, follow this sequence.

1. Start by pressing the Home button five times in a row.

2. After that, press the Up arrow one time.

3. Repeatedly press the button labeled “rewind.”

4. After that, press the button twice for the fast forward function.

The system will ultimately reset, and a bouncing Roku logo will display after it has been reset. This will happen once the button presses have been registered by Roku.

You may also bring up a restore mode screen by pressing and holding the reset button (also known as the pinhole button on certain versions) on your Roku device. You will be able to update and reset your device from this location.


Watch this video also for more insight about how to handle little issues on Roku

A Few Parting Thoughts

Removing the SD card and then restarting the Roku device is a simple way to repair a Roku TV that has become unresponsive. Because SD cards have in the past been the source of problems, you may as well give it a go.

In the event that none of the suggestions appear to have the desired effect, contact Roku support for more help.

Have fun streaming!



Leave a Comment

Your email address will not be published. Required fields are marked *