How to Record Your Mac Screen Using the Device’s Built-In Audio


If you want to demonstrate talent to someone or just want to record a moment on the screen of your Mac, the screen recording capability is a valuable tool.

There is a record screen feature built into every Apple computer, but it is not immediately apparent where to find this function.

How Do I Record My Screen on a Mac While Using the Built-In Audio?

Use the QuickTime Player program that comes pre-installed on a Mac to record your screen with the computer’s own audio. It provides choices for capturing the screen, the device’s internal audio, as well as the voice and audio coming from the outside. In any other case, make use of a program or application that may be obtained from the internet, such as Zoom.

The following is a condensed collection of instructions that will walk you through getting the finest possible audio and video recordings from your Mac.

Utilizing the BlackHole Plugin in conjunction with the QuickTime Player

If you only want to record the screen of your Mac, you can easily do it by pressing the Shift, Command, and 5 keys simultaneously. This will bring up a toolbar that gives you the ability to capture your screen in any way that you choose.

You may take a snapshot of a comparison of screenshots using this approach, as well as record certain areas of your screen or certain programs that are shown on your screen.

You will not be able to capture any of the internal audio using this straightforward technique, so it is unlikely that it will fulfill your requirements.

Launching the QuickTime Player application is a must for recording the system sounds on your own computer.

This application is pre-installed on all Apple computers and is able to play movies, edit videos, and manipulate video files on your system. It is the default software that comes with Apple computers.

This application will be able to capture both the audio coming from your device and the screen itself.

After that, you may trim the recording or compress it so that it’s easier to send to other people.

QuickTime Player does not provide an option to record the inner audio, which is unfortunate since technology such as that may be used to unlawfully record movies or videos and distribute them through piracy.

On the other hand, you can download a plugin for the Users to Stream Player that will enable it to perform these specific actions.

This add-on is known as BlackHole, and it may be downloaded from this location.

You will be able to get the plugin if you subscribe to the free Mac download. This is required in order to access the download.

Launch the plugin and proceed with the installation by following the on-screen instructions.

If you are having trouble downloading the file, go to your computer’s Security and Privacy options and unlock them so that modifications may be made.

You may accomplish this by going to the bottom left corner of the screen, clicking on the lock icon, and entering your password into the text field that appears.

Incorporating the BlackHole plugin into QuickTime Player

Once the BlackHole plugin has been loaded, you will need to do a spotlight search by pressing Command and Space on your keyboard to locate your Audio MIDI Setup. This is a service that manages the audio that is shared between different applications on your device.

If you installed BlackHole 16ch successfully, it should be one of the gadgets that the MIDI displays.

To create an internal input, click the “Create Aggregate Device” button at the bottom of the screen. The applications on your computer will be able to access the inbuilt sound on your gadget via the use of this device.

When you access your brand new internal input device, you should see a list of various devices with checkboxes next to each one of them.

Check the box next to the BlockHole 16ch gadget on the list, and then use the button towards the bottom of the screen to create a brand-new multi-output device.

Please call this one “QuickTime Output,” and ensure that the BlackHole 16ch box is checked once again.

In addition to this, you have to check to see if the “Built-in Output” option is chosen.

Last but not least, you will need to make sure that the new output device is enabled before you can play recordings that you have made and hear the internal sound.

When you’re there, navigate to the Sound section of your System Preferences and choose the Output option. After making sure that “QuickTime Output” is selected as the output device, you should be ready to record.

You can read related articles here also: General Tech/Our Blog

Putting together your recording


After the new output and input devices have been established, launch QuickTime Player and choose the File menu from the drop-down menu to continue.

When you choose the “New Screen Recording” option, the toolbar for recording the screen will become visible. Make sure that your microphone is set to the internal input device by going to the Options menu on the toolbar and making the necessary changes.

You are free to begin capturing your screen capture now, and the audio from your computer will be included.

When you are through creating your recording, go to the Sound section of your computer’s Preferences menu and modify the output sound option so that it is set to the default value.

If you are experiencing any problems, try restarting your Mac. You shouldn’t have too much trouble figuring out how to use the QuickTime Player, but if you do, Apple’s website is available to answer any questions you may have.

You can watch this video below also it serves as a guide on how to screen record with a mac.

Using Zoom to Capture Your Screen

Zoom provides many choices for screen recording, which might be useful if you are experiencing difficulties with both the QuickTime Player and the BlackHole plugin.

The majority of people already have the Zoom program downloaded on their Macs, since it is both user-friendly and simple to use.

Start by installing the app if you haven’t done so previously or if you want to use this app for screen recordings that have their own internal audit.

The download is available at this location.

After you have downloaded Zoom, go to the Zoom website, sign in, and start a new meeting.

It ought to be possible for you to share your screen during the conference if you look in the menu bar.

┬áIf you click here on the button, you’ll be able to choose which parts of your screen you want other people to see.

Zoom gives you the ability to customize the way it captures the audio coming from your computer if you go to the Advanced settings when you are choosing what you want to share.

Zoom gives you the opportunity to work with other people in addition to recording what’s on your screen.

Everyone will be able to contribute to the creation of the video if you let them share their screens.

When it comes to recording collective projects, this comes in very handy.

After you have finished providing the information you want to offer, you may begin recording by clicking the “More” button located in the menu.

Zoom provides you with the choice to either record locally on your device or uploads your recordings to the cloud.

While recordings saved on your PC are somewhat more manageable than those stored in the cloud, cloud recordings may be accessed via your Zoom account.

You are free to begin recording as soon as you have selected the medium on which you want to do so.

Because it was developed for educators and individuals who conduct group meetings, Zoom has a number of options that may be used in the creation of high-quality screen recordings.

Additionally, it separates the recordings you create into audio and video versions, providing you with a multitude of editing capabilities for both types of media.

With a little bit of experience and utilizing the internal music that comes from your Mac, you should be able to produce amazing screen recordings using the internal audio that originates from your Mac. with a little bit of experience and utilizing the internal music that comes from your Mac.

Leave a Comment

Your email address will not be published. Required fields are marked *