The 10 quickest and easiest methods to maintain your AirPods

Airpods

The Apple AirPods have quickly become the most sought-after headphones available, especially among those who possess an iPhone.

On the other hand, just like any other headphones or piece of electrical equipment, they will grow dirty over time and will require cleaning.

Earwax isn’t the only thing that might clog AirPods; if they fall under your car seat, they’ll also pick up dirt and grime, both of which can impede their performance.

And it should go without saying that whatever you come into daily contact with a will, over time, become tainted with germs and grease.

Fortunately, both the AirPods themselves and their carrying case are easy to clean.

To cleanse your AirPods and their case, you will need at least one cloth that does not contain lint, some liquid, and a tool with a fine edge like a toothpick or pin.

If there are any stains that are really difficult to remove, you may need to try using some rubbing alcohol.

“The Method Based on Apples”

Apple recommends using a “soft, dry, cotton gauze cloth” and just a “dry cotton ball” (or Q-tip) to remove any loose dirt from the speaker mesh while cleaning your AirPods. The cloth should be dry and lint-free.

According to the rules, neither the AirPods nor the AirPods Pro is water-resistant (AirPods Pro are merely water-resistant to a certain degree).

However, the reality is a little bit different.

The longer you use your AirPods, the more gunk gets stuck inside of them and ramps up against the speaker mesh.

The hinge area of your AirPods can quickly get soiled if you often carry them around in your purse or handbag. This may happen in as little as two weeks. Both of these locations are tough to clean if one simply has swabs and a towel at their disposal.

Because dust and other debris may quickly get lodged right down at the end of the recharging bays, you may find that you need to clean farther into the interior of the charging bays of the case.

It is possible for the lightning port that is located on the bottom of the device, similar to the one that is located on your iPhone or iPad, to get blocked with lint as well as other materials.

In light of the fact that Apple’s cleaning standards make it very unlikely that your AirPods will be broken, it is also quite unlikely that you will be washing them very often.

There are options available, which is a fortunate development.

The proper way to clean your Apple AirPods

Due to the fact that the earbuds are by far the most fragile component of your AirPods, you need to treat them with extreme care.

It is not a smart idea to exert an excessive amount of pressure on the speaker mesh.

This will just push the dirt further and further into the earphone, and there is a possibility that it could also remove the entire speaker mesh.

Apple recommends using a soft cloth to clean the outside of the earbuds, so feel free to give it a go.

If there is any discoloration or persistent grime, you might try dampening the towel a little bit and giving it another go.

Keep in mind that you also need to clean the sensors.

First, as recommended by Apple, clean the area around the grill with a Q-tip. If it doesn’t work, you may try using anything sharp and pointed, like a toothpick, and that should do the trick.

In the event that it is necessary, use the tip to scrape the waxes and debris out of the loudspeaker mesh.

Again, take care not to use too much force, but any dirt or grime should come out without any difficulty.

Blu-tack may also be used as an alternative method for cleaning your AirPods.

To do this, first get a piece of Blu-Tack (or any other kind of reusable glue) and warm it up in your hands.

After pushing the Blu-tack into the earphone speaker mesh, quickly remove it from the mesh of the earphones.

Continue doing so until all of the dirt and grime that was on your AirPods has been removed.

However, be careful not to push the Blu-tack too far into the earpiece as it might damage it.

Isopropyl alcohol may be sprayed into a Q-tip, and then the tip can be used to loosen anything that is stuck in the speaker mesh. You can also try using rubbing alcohol.

In just a few short minutes, any trace of alcohol that may still be present will vanish.

How to Clean Each Component of Your Apple AirPods | MaidForYou

You may also use a dry sponge to clean the inside of your AirPods, and then use a toothbrush with medium or hard bristles to remove any ingrained debris. This is still another alternative.

AirPods: The Proper Way to Clean Them.

How the AirPods Are Thoroughly Cleaned | Thoroughly Cleaned

The AirPods Pro is equipped with silicone tips that provide a better seal when placed in the ear.

These needles may be withdrawn for a more straightforward cleaning process.

Apple recommends removing them and letting them soak in water unless they have the appearance of being brand new.

Before you try to reconnect them, give them some time to completely dry out.

AirPods Pro should never be submerged in water by themselves under any circumstances.

They are not completely waterproof, but they are resistant to water. Once the silicon tips have been removed, cleaning the AirPods Pro with a dry or damp towel should be a straightforward process.

If there is any muck stuck within the speaker canal, you may clear it out by using one of the ways that were described above. When you are cleaning, just keep in mind that you shouldn’t use too much pressure.

You can also read other articles here: General Tech/Our Blog

How to clean the charging case for your AirPods.

It’s possible that the wall charger for your AirPods is just as unsanitary as the headphones themself.

It is infamously difficult to clean the area surrounding the hinge, and the case itself is notoriously poor at preventing the accumulation of dirt and filth within.

To thoroughly clean the charging case, the only method that allows access to the hinge area is to use a toothbrush with medium or hard bristles. Because of this, we recommend utilizing the toothbrush.

You could find it helpful to dampen your brush in order to remove the more difficult objects.

Because of the frequent compression that occurs when you open and closes the case, it may be difficult for you to remove some types of grime.

If cleaning the area with a damp cloth or a toothbrush does not help, try using a Q-tip that has been soaked in isopropyl alcohol instead (never spray alcohol or water directly on the case).

Rub the area with the Q-tip to remove the dirt that has accumulated there. Kindly have patience with me, since this can take some time.

Take a look at the charging stations, which are located in the spot where one would normally look for their AirPods.

You should take care not to damage the charging connectors, which are located at the very bottom of the device.

A dry Q-tip ought to do the trick when it comes to cleaning up this area.

If the gunk is particularly resistant to being removed, try moistening the tip of the Q-tip with some water or isopropyl alcohol.

One more thing to keep in mind: the Lightning port is located on the base of the charging case. It is possible to do a great job cleaning this area using a toothpick made of wood.

You may be using anything with a tiny metal tip to clean charging ports, such as with a SIM key or an unfurled paperclip (this is what we’ve seen employees at Apple Stores do), but the most effective tool is a SIM key.

Be careful not to apply too much force, since this might potentially damage the charging contacts that are contained inside the Lightning port.

When sanitizing your Airpod, you should steer clear of these items.

To conclude, you may cleanse your AirPods using a cloth, cotton balls, Q-tips, chopsticks, toothbrush, Blu-tack, moisture, and even isopropyl alcohol if you are careful. Other options include toothpicks, toothbrushes, and toothpicks.

On the other hand, you should under no circumstances use compressed air to clean your AirPods, particularly in the areas around the loudspeaker mesh and charging port.

Users are strongly discouraged by Apple from cleaning any of their products with high-velocity air due to the risk of damaging internal components.

In a similar vein, harsh cleaning methods such as bleach have the potential to return the white color to your AirPods, but they also carry the risk of damaging the plastic.

In addition, these chemicals have a propensity to leave a residue behind on surfaces, and it is not a good idea to put bleach in your ear.

Finally, especially if you already have the AirPods Pro model that is water-resistant, you should still avoid completely submerging them in liquid.

Because your AirPods are always turned on when you remove them from their case, it is quite possible that even an accidental submersion would render them useless.

 

Watch this video from Insider to learn how to properly maintain and clean your AirPods on a regular basis.

Always Make Sure Things Are Kept Clean

If you regularly clean your AirPods, you can save yourself both time and work by avoiding buildup from occurring on the pods.

If you give your headphones and their carrying case a quick wipe down once a month, the dirt and grime that have accumulated over the course of a year will be much easier to remove.

If you are a large consumer or if you use your AirPods while exercising, you should consider cleaning them more often than you may otherwise.

 

Leave a Comment

Your email address will not be published. Required fields are marked *